Install the CASCADE module

This is an optional module that adds 3D CAD file support (STEP format) for Chrono::Engine using the OpenCASCADE library.

Read the introduction to modules for a technical background on the modularity of the Chrono::Engine project.

Features

The CASCADE module uses the functions of the OpenCASCADE open-source library in order to allow loading CAD models that were saved in the STEP file format.

Here are the main features:

  • Load object shapes saved in STEP file format
  • Compute the center of mass, the mass, the inertia of shapes
  • Convert shapes in triangulated meshes for visualization

Requirements

  • To run applications based on this module:
  • To build this module:

Building instructions

  1. Repeat the instructions for the full installation, but when you see the CMake window, you must add the following steps:
  2. Set the ENABLE_MODULE_CASCADE as 'on', then press 'Configure' (to refresh the variable list)
  3. Set the CH_CASCADEDIR to the path where you have your OpenCASCADE SDK (the one that has inc/, src/, etc. subdirectories), for example it could be D:/OpenCASCADE6.9.0/opencascade-6.9.0
  4. Press 'Configure' again, then 'Generate', and proceed as usual in the installation instructions.
Warning! if you execute the demo .exe programs of this module, most likely you will get an error message because Windows cannot find some OpenCascade DLLs.

In order to have the DLLs reachable, on windows, do the following:

Execute the env.bat script in the OpenCascade directory before launching the demo (but only from the same DOS shell, via command line) or better, to have path and environment variables already set all times you start windows, go to control panel / system / environment variables window, and just add this minimal set of data:

  • to the PATH variable, add the paths containing the required OpenCASCADE .dll files (assuming you installed OpenCASCADE 6.9.0 in D:, otherwise put your paths), separating them with ; and no spaces:
    • D:\OpenCASCADE6.9.0\opencascade-6.9.0\win64\vc10\bin
    • D:\OpenCASCADE6.9.0\freeimage-3.16.0-vc10-64\bin
    • D:\OpenCASCADE6.9.0\tbb42_20140416oss\bin\intel64\vc10
  • optionally add also these environment variables with these values (again, modify the path if you used another installation directory for OpenCASCADE)
    • CSF_LANGUAGE=us
    • MMGT_CLEAR=1
    • CSF_EXCEPTION_PROMPT=1
    • CSF_STEPDefaults=D:\OpenCASCADE6.9.0\opencascade-6.9.0\src\XSTEPResource In this way, you will be able to start the OpenCASCADE demos by simply clicking on the .exe, without the need of calling the env.bat script before.

How to use it

  • Look at the API section of this module for documentation about classes and functions.
  • Look at the C++ source of demos to learn how to use the functions of this module.